-
Call us +91-9996510929
-
Email trehan.akhil@yahoo.com
@ 2023 Conxport.
Call us +91-9996510929
Email trehan.akhil@yahoo.com
@ 2023 Conxport.
Model No:CEI-DS-SH33
HOW TO OPERATE:
1. Take two 1000 ml barkers fill them with chemical and place than below the basket.
2. Now put the tablet in the basket and fix the basket as the stand.
3. Inset the socket into the main provide on the left side at the back of the instrument and switch on the set the temperature with digital temperature controller if the green bulb glow it show the Heater in ‘ON’.
4. Switch the motor up down movement of the basket will start and adjustable switch of speed control on right side the instruments.
5. This instrument will show how much time the table takes to crush in powder.
PRECAUTION:-
1. Keep the instrument clean and dry.
2. Do not handle the instrument with wet hands.
Voltage 220-230 Volt (v)
Product Type Disintegration Single
Weight 10 Kilograms (kg)
Usage For Laboratory Use
Material Stainless Steel
Color Black
The test equipment work on up and down movement of tablet in medium of water kept at 37ºC. Built on a M.S. Cabinet, which housed a geared motor for the vertical shaft drive the shaft moves up and down by 7.5 cms at speed of 30 per minute. On the upper end of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Two interpedently thermostatically controlled not plate rating 65 watt are fixed on the top of the cabinet upon which beakers of 1000 ml size are net filled with water. Temperature is maintained at 37ºC with and accuracy of 1 C. Independent switches with neon indicators for motor hot plates are fitted on a panel. Mains fuse with two meters mains cord and plug provided. Work on 220 volts A.C. mains.